Rigid-Flex PCB Capabilities
As the name implies, rigid-flex printed circuit boards(PCBs) are the composite boards of rigid boards and flexible boards. Most rigid-flex circuits are multi-layered. A rigid-flex PCB can include one/several flex boards and rigid boards, which are connected through internally/externally plated-through holes.
See more introduction about Rigid-flex PCBs,click here
Check the manufacturing capabilities of the rigid-flex PCB from MUC PCB.
| No. | Item | Process Capability Parameter |
|---|---|---|
| 1 | PCB Type | Rigid-flex PCB |
| 2 | Quality Grade | Standard IPC 2 |
| 3 | Layer Count | 2 layers, 3 layers, 4 layers, 6 layers, 8 layers |
| 4 | Material | Polyimide Flex+FR4 |
| 5 | Board Thickness | 0.4~3.2mm |
| 6 | Min Tracing/Spacing | ≥4mil |
| 7 | Min. Hole Size | ≥0.15mm |
| 10 | Surface Finish | Immersion Gold (ENIG), OSP, Immersion Silver |
| 11 | Special Specification | Half-cut/Castellated Holes, Impendence Control, Layer Stackup |
Flexible Part of the Rigid-Flex PCB
| No. | Item | Process Capability Parameter |
|---|---|---|
| 1 | Layer Count | 1 Layer, 2 Layers, 4 Layers |
| 2 | FPC Thickness | 0.13mm, 0.15mm, 0.18mm, 0.2mm |
| 3 | Coverlay | Yellow, White, Black, None |
| 4 | Silkscreen | White, Black, None |
| 5 | Finished Copper | 0.5oz, 1oz, 1.5oz, 2oz |
For other parameters of the flexible part, please refer to Flexible PCB Manufacturing capabilities.
Rigid Part of the Rigid-Flex PCB
| No. | Item | Process Capability Parameter |
|---|---|---|
| 1 | Soldermask | Green, Red, Yellow, White, Black, Blue, Purple, Matte Green, Matte Black, None |
| 2 | Silkscreen | White, Black, None |
| 3 | Finished Copper | 1oz, 2oz, 3oz, 4oz |
Contact MUC PCB for more information about our rigid-flex printed circuit board: service@pcbgogo.com
